quit smoking, start vaping

Twisted Messes RDA V2

£55.00

The Twisted Messes RDA V2 features a two-post design with 4 individual post holes. Each post hole is 2.8mm in diameter accommodating any build you can throw at it.

The split-post design allows for a dramatic increase in coil installation versatility.

Content 

  • One assembled atomiser
  • One high-quality 1.5mm hex-driver
  • One extra black AFC ring
  • One extra RADEL drip tip
  • 4 extra hex screws
  • One 510 drip tip adapter
  • 4 extra O-Rings

Specs:
  • Split post design allowing coil installation into the centre, far sides or via the standard method.
  • Negative post milled into the deck
  • Deck is 22mm
  • Four individual 2.8mm post holes
  • Clamp style posts with flat bottomed screws for better connection
  • 5.5mm juice well
  • Stainless Steel throughout the RDA (except contact pin)
  • The black Drip Tip is not delrin. It is RADEL, a high-temperature plastic with a slightly lower melting point than PEEK
  • Hex-Driver
  • Square air-holes, cut via electricity
  • All PEEK insulators
  • Gold plated brass contact pin
  • Three 3x3mm adjustable square air-holes, with a single coil airflow option on the inner barrel (smallest option is one air-hole open, in both single and dual mode)

 

Twisted Messes RDA V2

The Twisted Messes RDA V2 features a two-post design with 4 individual post holes. Each post hole is 2.8mm in diameter accommodating any build you can throw at it.

The split-post design allows for a dramatic increase in coil installation versatility.

Content 

  • One assembled atomiser
  • One high-quality 1.5mm hex-driver
  • One extra black AFC ring
  • One extra RADEL drip tip
  • 4 extra hex screws
  • One 510 drip tip adapter
  • 4 extra O-Rings

Specs:
  • Split post design allowing coil installation into the centre, far sides or via the standard method.
  • Negative post milled into the deck
  • Deck is 22mm
  • Four individual 2.8mm post holes
  • Clamp style posts with flat bottomed screws for better connection
  • 5.5mm juice well
  • Stainless Steel throughout the RDA (except contact pin)
  • The black Drip Tip is not delrin. It is RADEL, a high-temperature plastic with a slightly lower melting point than PEEK
  • Hex-Driver
  • Square air-holes, cut via electricity
  • All PEEK insulators
  • Gold plated brass contact pin
  • Three 3x3mm adjustable square air-holes, with a single coil airflow option on the inner barrel (smallest option is one air-hole open, in both single and dual mode)

 

£55.00 In Stock
Sale

Unavailable

Sold Out